24. How do you flush a jet that doesn’t have a flushing hole?-

On jet drives in which the cooling pump is attached to the top of the bearing housing, it is not possible to provide a flushing inlet. Immersing the jet drive in a barrel of water doesn’t work either, because the water is thrown out. Backing the boat into some fresh water is the only solution. Present production provides a flushing inlet where it is possible to do so, depending on the model. If the parts book shows a flushing bolt and sealing washer, and your early jet drive does not have this, it can be added. Where to locate this threaded hole is called out on our engineering drawings.

Posted in: Maintenance & Ownership